What is the solution to the problem of using ring groove rivet guns?
What is the solution to the problem of using ring groove rivet guns ? I introduce you to the practical and simple operation of the rivet gun! It has been highly praised by the industry. In recent years, it has also played an important role in the riveting industry. However, if the machine is used infrequently or improperly, it will malfunction.
What are the main ingredients of a rivet gun?
Answer: It mainly consists of handlebar, gun body, trigger and pipe joint.
There are various problems with using rivet guns. How do I resolve a problem? Here are the types and solutions to common problems.
1. The nail gun is pulled or broken several times;
Answer: The oil shortage stroke of the cylinder is shortened; the claws and push rods are worn. Before closing the jaws, adjust the jaws too far.
Solution: add hydraulic oil to the cylinder; replace the claws and push rods; adjust the chin sleeve to the appropriate position.
2. After the nail is pulled by the rivet gun, the nail will not retract (staple);
Answer: The guide nozzles do not match; the claw sleeve is adjusted too far backward to open.
Solution: Replace the matching guide; After adjusting the jaw cover to the proper position, the nail with the broken nail naturally falls out of the back from the guide.
3. The rivet gun pushes the switch, does not pull the nails, only runs out of nails.
Answer: The switch O-ring is broken; the piston O-ring is damaged.
Solution: Replace the O-ring.
Automatic rivet gun suction project
Automatic nailing, pulling speed is twice as fast as before. Automatic nail pull, continuous rivet operation, no need to reverse nails, save time. It is made of aerospace aluminum and is lightweight and non-fatiguing for a long time. Adjustable tension and speed.