威尼斯线上网址

Professional production: slot rivet machine, ring slot rivet gun, hydraulic ring slot rivet machine, hydraulic ring slot rivet gun
National Online Consultation: 15617114741
    您现在所在的位置: 首页 > 产品中心 ProductsYou are here: Home > Products
Hydraulic ring groove rivet gun
  • Hydraulic ring groove rivet gun
产品描述:环槽铆钉机铆钉直径从10-24mm,用的多得就是16和20mm的两种哈克铆钉。 Product description of the hydraulic ring groove rivet gun : The diameter of the ring groove rivet machine is from 10-24mm, and the two types of rivets are 16 and 20mm. Various models of the company's ring groove rivet machines have sufficient stock. 在线咨询 How to use the hydraulic ring groove rivet gun: 1. Before starting work, inject a small amount of lubricant from the air inlet. Online consultation
Service Hotline
15617114741
Product Details

Ring groove rivet machine rivet diameter from 10-24mm, the most commonly used are 16 and 20mm two hacker rivets. Various models of the company's ring groove rivet machines have sufficient stock.

How to use the hydraulic ring groove rivet gun :

1. Before starting work, inject a small amount of lubricating oil from the air inlet to ensure the working performance and working life of the rivet gun.

2. Maintain the prescribed intake pressure. If the air pressure is too small, the power of the rivet will be reduced, and not only the efficiency of riveting is low, but also the rivet head may crack due to excessive hammering times.

3. Press the button after the punch is tightened against the rivet. Otherwise, the piston produces a back-and-forth motion, which consumes a part of the energy, and the piston hits the casing, which damages the rivet gun.

4. Use a protective spring to connect the punch to the gun body firmly to prevent the punch from flying out and damaging people or products.

5. Hold the right handle and press the button with your index finger to start the rivet gun. The button can be used to adjust the size of the compressed air to ensure the rivet gun to work smoothly. At the beginning of riveting, because the rivet rod is longer, the gap between the rivet rod and the rivet hole is larger, and the rivet rod is easy to bend when being hammered. Therefore, the button should be pressed lightly to make the rivet gun less powerful. After the rivet rod fills the rivet hole and then press it again, increase the rivet power to quickly form the pier head. When the head is near completion, gradually release the button to prevent the pier head from hitting. Is too low.

6. The tail of the punch is prepared according to different rivet gun models. It should not be used in series to avoid damage to the parts and reduce efficiency.

7. The gun should not be emptied randomly during use to avoid damage to the parts.

The ring groove rivet is also called a hacker nail, and the rivet is composed of a nail rod and a nail sleeve. A set of ring groove rivets is composed of a nail rod and a collar. This rivet has high strength clamping force and shockproof function. Can replace conventional bolts and nuts. Ring groove rivets have a wide range of applications: for example, containers, passenger cars, construction, aerospace.

Although the ring groove rivet is a blind rivet, it is not a blind rivet because it is installed on both sides of the board surface. They offer higher shear strength, tensile strength, clamp loading and vibration resistance than most other products in blind rivets. Made of aluminum, steel and stainless steel, diameters can range from 3/16 "to 3/8".


Related Products
  • Previous: No more;
  • Next: Lifting door machine
  • Consulting Service Hotline
    15617114741
    2017-2018 All Rights Reserved 技术支持: 恩愉网络 CopyRight © 2017-2018 All Rights Reserved Technical Support: Enyu Network
    棋牌娱乐游戏 波音网上平台公司 新手澳门赌场玩法 捕鱼游戏下载 网上棋牌游戏下载 澳门金沙游戏场 必发注册平台大全 甘肃快三开奖结果 网赌正规真人平台 网上现金捕鱼平台