威尼斯线上网址

Professional production: slot rivet machine, ring slot rivet gun, hydraulic ring slot rivet machine, hydraulic ring slot rivet gun
National Online Consultation: 15617114741
    您现在所在的位置: 首页 > 产品中心 ProductsYou are here: Home > Products
Pneumatic ring groove rivet gun
  • Pneumatic ring groove rivet gun
产品描述:产品介绍 环槽铆钉枪是专门用于环槽铆钉安装的工具,一般是气动环槽铆钉枪和液压站。 Pneumatic ring groove rivet gun Product description: Product introduction The ring groove rivet gun is a tool specifically used for the installation of ring groove rivets, generally pneumatic ring groove rivet guns and hydraulic stations. Use method 1. Before starting work, inject a small amount of lubricating oil from the air inlet to ensure the working performance and working life of the rivet gun. 在线咨询 2Online consultation
Service Hotline
15617114741
Product Details

product description

The ring groove rivet gun is a tool specially used for the installation of ring groove rivets, generally pneumatic ring groove rivet guns and hydraulic stations.


Instructions

1. Before starting work, inject a small amount of lubricating oil from the air inlet to ensure the working performance and working life of the rivet gun.

2. Maintain the prescribed intake pressure. If the air pressure is too small, the power of the rivet will be reduced, and not only the efficiency of riveting is low, but also the rivet head may crack due to excessive hammering times.

3. Press the button after the punch is tightened against the rivet. Otherwise, the piston produces a back-and-forth motion, which consumes a part of the energy, and the piston hits the casing, which damages the rivet gun.

4. Use a protective spring to connect the punch to the gun body firmly to prevent the punch from flying out and damaging people or products.

5. Hold the right handle and press the button with your index finger to start the rivet gun. The button can be used to adjust the size of the compressed air to ensure the rivet gun to work smoothly. At the beginning of riveting, because the rivet rod is longer, the gap between the rivet rod and the rivet hole is larger, and the rivet rod is easy to bend when being hammered. Therefore, the button should be pressed lightly to make the rivet gun less powerful. After the rivet rod fills the rivet hole and then press it again, increase the rivet power to quickly form the pier head. When the head is near completion, gradually release the button to prevent the pier head from hitting. Is too low.

6. The tail of the punch is prepared according to different rivet gun models. It should not be used in series to avoid damage to the parts and reduce efficiency.

7. The gun should not be emptied randomly during use to avoid damage to the parts.


Related Products
  • Previous: No more;
  • Next: Lifting door machine
  • Advisory Service Hotline
    15617114741
    2017-2018 All Rights Reserved 技术支持: 恩愉网络 CopyRight © 2017-2018 All Rights Reserved Technical Support: Enyu Network
    棋牌娱乐游戏 波音网上平台公司 新手澳门赌场玩法 捕鱼游戏下载 网上棋牌游戏下载 澳门金沙游戏场 必发注册平台大全 甘肃快三开奖结果 网赌正规真人平台 网上现金捕鱼平台