The ring groove rivet gun is a tool specially used for the installation of ring groove rivets, generally pneumatic ring groove rivet guns and hydraulic stations.
1. Before starting work, inject a small amount of lubricating oil from the air inlet to ensure the working performance and working life of the rivet gun.
2. Maintain the prescribed intake pressure. If the air pressure is too small, the power of the rivet will be reduced, and not only the efficiency of riveting is low, but also the rivet head may crack due to excessive hammering times.
3. Press the button after the punch is tightened against the rivet. Otherwise, the piston produces a back-and-forth motion, which consumes a part of the energy, and the piston hits the casing, which damages the rivet gun.
4. Use a protective spring to connect the punch to the gun body firmly to prevent the punch from flying out and damaging people or products.
5. Hold the right handle and press the button with your index finger to start the rivet gun. The button can be used to adjust the size of the compressed air to ensure the rivet gun to work smoothly. At the beginning of riveting, because the rivet rod is longer, the gap between the rivet rod and the rivet hole is larger, and the rivet rod is easy to bend when being hammered. Therefore, the button should be pressed lightly to make the rivet gun less powerful. After the rivet rod fills the rivet hole and then press it again, increase the rivet power to quickly form the pier head. When the head is near completion, gradually release the button to prevent the pier head from hitting. Is too low.
6. The tail of the punch is prepared according to different rivet gun models. It should not be used in series to avoid damage to the parts and reduce efficiency.
7. The gun should not be emptied randomly during use to avoid damage to the parts.
- How to effectively eliminate the riveting deformation of ring groove rivet specifications? 2019-10-10
- What is the solution to the problem of using ring groove rivet guns? 2019-10-10
- The ring groove rivet machine replaces the bolts, and then puts the socket wrench in place when tightening2019-09-26
- If there is any abnormality in the ring groove rivet gun, please stop maintenance and repair immediately and solve the problem directly.
- Ring groove rivet machine is easy to install and designed to meet the requirements of human mechanics2019-09-23
- The cross-sectional area of the ring groove rivet gun is determined by the mass, density and length of the sample2019-09-23